PROJECT ICARUS A Theoretical Design Study for an Interstellar Spacecraft Dr. Richard Obousy

“Standing on the shoulders of giants” definitely describes the task being undertaken by Richard Obousy and his colleagues as they work to design a realistic interstellar spacecraft based on state-of-the-art engineering. The shoulders upon which they stand belong to the Project Daedalus team that performed a similar study in the 1970s for The British Interplanetary Society. Led by Alan Bond, Project Daedalus became the standard by which all interstellar spacecraft concepts to follow were judged.

Named for Icarus, Daedalus’ son who flew too close to the Sun and fell to his death, Obousy’s international team is designing a craft that will hopefully avoid its namesake’s mistakes and harness the power of the sun to someday give us the stars—Project Icarus.

* * *
Motivations for Project Icarus

Kepler, launched in 2009, is the first NASA mission designed explicitly to search for planets orbiting other stars. On Saturday 19th February 2011, the project scientist for Kepler, Dr. William Borucki, estimated that there are at least fifty billion exoplanets in our galaxy. Perhaps more tantalizing is the probability that five hundred million of these alien worlds are inside the habitable zones of their parent stars. So just how many of these exoplanets contain life? Unfortunately, there’s no good answer to that question, but given such vast numbers of potentially habitable worlds, the question is, Where is ET?

This is, of course, the famous Fermi Paradox, an apparent contradiction between the high estimates of the probable existence of extraterrestrial civilizations and the disconcerting lack of evidence for such civilizations.

Many assumptions regarding the ability of an alien civilization to effectively colonize other solar systems are based on the premise that interstellar travel is, in fact, technologically possible. However, one early proposed solution to the Fermi Paradox was that interstellar travel on timescales of tens, or hundreds, of years is impossible. Project Daedalus, a study conducted in the 1970s by members of The British Interplanetary Society, was a bold effort to examine this very question. The project was essentially a feasibility study for an interstellar mission, using capabilities appropriate to the era, with credible extrapolations for near-future technology.

One of the major objectives was to establish whether interstellar flight could be realized within established science and technology. The conclusion was that it is feasible. Although our current understanding of the laws of physics rules out the possibility of superluminal travel, it does appear that there are no major theoretical barriers to the construction of rapid, sublight, interstellar ships.

The final Daedalus design had a total dry mass of greater than 2600 hundred tons, of which 450 tons was the science payload. The propellant mass was fifty thousand tons of Deuterium and Helium-3. The latter component of the fuel is incredibly rare on Earth. However, it is found in abundance on the gas giants of the solar system. Thus, a component to the Daedalus project entailed mining Helium-3 from Jupiter. Because of the huge mass of the spacecraft, and the necessary Jovian mining aspect of the mission, the Project Daedalus study group determined that such a spacecraft could probably only be constructed as part of a solar-system-wide economy with abundant resources at its disposal. Daedalus, from the perspective of 1970s science, was deemed to be effectively unavailable in the near-term future.

This would place its earliest likely construction date somewhere circa 2200. However, numerous technologies have advanced since the 1970s, including microprocessor technology, materials science, nanotechnology, fusion research and also our knowledge of the local interstellar neighborhood. It seemed timely then to revisit the Project Daedalus study, and the successor initiative, Project Icarus, officially began in September 2009 at a meeting in London at the headquarters of the British Interplanetary Society (BIS). This theoretical engineering design study is a project under the umbrella of the Tau Zero Foundation and The BIS.

Origins and Birth of Project Icarus

Project Icarus has its origins in late 2008 during discussions between Kelvin Long and NASA physicist Marc Millis, who left NASA to become President of the Tau Zero Foundation. These discussions led to a proposal for a study based upon a redesign of Daedalus. The study was to include an examination of the fundamental assumptions, for example, of whether Daedalus should be strictly a flyby mission, or should participate in mining Jupiter for Helium-3.

In 2008, several members of the original Daedalus Study Group were approached and asked to participate in a new study. Project Icarus was born. To increase the visibility of Project Icarus, a presentation was given by Long at a special session on interstellar flight at the Charterhouse Space Conference during 2009. After several months of recruitment, over a dozen volunteer designers and consultants joined the project.

The official launch of Project Icarus was recorded in Spaceflight magazine, and a number of the original Project Daedalus study group were in attendance. These included Alan Bond, Bob Parkinson, Penny Wright, Geoff Richards, Jerry Webb and Tony Wight. The founding members of Project Icarus at this event also included Martyn Fogg, Richard Obousy, Andreas Tziolas and Richard Osborne. Others present who were later recruited to the team included Pat Galea, Ian Crawford, Rob Swinney and Jardine Barrington-Cook. The membership continues to grow.

Icarus: A Lesson from Mythology

Icarus was a character from ancient Greek mythology. In an attempt to escape the labyrinth prison of King Minos, his father Daedalus fashioned a pair of wings made of feathers and wax for both himself and his son. Icarus, so the story goes, flew too close to the Sun and the wax on his wings melted. He fell into the sea and died after having touched the sky.

To paraphrase Sir Arthur Eddington from Stars and Atoms, the standard interpretation of the Icarus myth is that he was a man performing a stunt who met his ill-fated doom due to his antics. However, an alternative interpretation of the myth is that he is the man who illuminated a serious constructional deficiency in the flying machines of his era. Perhaps there is also a lesson for science here. A more cautious Daedalus applies his theories only where he feels confident they will succeed; but by his overindulgent caution, their veiled faults remain undiscovered. Conversely, Icarus will drive his theories to the threshold of collapse, and we may at least hope to learn from his flight how to construct a better machine.

Purpose and Ambitions of Project Icarus

Project Icarus, as the successor to Project Daedalus, is a theoretical engineering design study for an unmanned interstellar craft. Its overall purpose can be summarized as follows:

• To design a credible interstellar probe that embodies the essential concepts for a successful mission in the coming centuries.• To allow a direct technology comparison with Daedalus and provide an assessment of the maturity of fusion-based space propulsion for future precursor missions.• To generate greater interest in the real term prospects for interstellar precursor missions that are based on credible science.• To motivate a new generation of scientists to be interested in designing space missions that go beyond our solar system.

Using these four purposes as a guide, the collective scope of the project is codified in the Icarus Terms of Reference:

1. To design an unmanned probe that is capable of delivering useful scientific data about the target star, associated planetary bodies, solar environment and the interstellar medium.2. The spacecraft must use current or near-future technology and be designed to be launched as soon as is credibly determined.3. The spacecraft must reach its stellar destination within as short a time as possible, not exceeding a century and ideally much sooner.4. The spacecraft must be designed to visit any one of a variety of target stars.5. The spacecraft propulsion must be mainly fusion based (e.g. Daedalus).6. The spacecraft mission must be designed so as to allow some deceleration for increased encounter time at the destination.

One of the main differences between Daedalus and Icarus is the requirement that there be some deceleration at the target system. Daedalus had a cruise velocity 12% of light speed, and would have raced through the target system within days. It would have been in close proximity to any planet for only a matter of seconds. This short encounter time would severely restrict the scientific return from the mission, and so Icarus is committed to address the issue of deceleration.

Parallel Objectives

Project Icarus is clearly a highly scientific endeavor whose success will be measured by the credibility and quality of the work that is created. Despite these academic ambitions, there are additional motives behind the project that are worthy of further examination.

One such motive is to use Icarus as a vehicle for training a new generation of interstellar engineers. The field of interstellar propulsion is sprinkled with luminaries whose names have become synonymous with the field of interstellar propulsion. These visionaries include VIPs such as Robert Bussard, Bob Forward, Greg Matloff, Robert Frisbee and Alan Bond, whose names will be immediately recognizable to interstellar aficionados. To maintain the healthy vision of a future where interstellar travel is possible, a new generation of capable enthusiasts is required. Project Icarus was designed with this specific motive in mind, and a quick glance at the Icarus designers reveals an average age close to thirty. Thus, one hope is that, upon completion of the project, an adept team of competent interstellar engineers will have been created, and that this team will continue to kindle the dream of interstellar flight for a few more decades until, presumably, they too become grey and find their own enthusiastic replacements.

Another parallel objective of Project Icarus is to evolve the possibility of interstellar flight from being merely feasible to actually being practical. The Daedalus design demonstrated that, with sufficient determination, a craft could be built using known principles of physics that could reach another star system in approximately fifty years. However, some critical components to Daedalus may lead a conservative spectator to believe that Daedalus was too ambitious.

Two impractical aspects of the original Daedalus spring to mind. The first is a feature of the propulsion system which necessitates the firing of marble-sized pellets, consisting of mainly deuterium and Helium-3, into a reaction chamber at a rate of 250 pellets per second. These pellets would then be ignited by high powered relativistic electron beams in a process known as inertial confinement fusion (ICF). Though considered a credible way to liberate energy from the fusion fuel, the fusion ignition rate of 250 hertz is difficult to be taken seriously given that the National Ignition Facility (NIF), a large U.S. fusion ignition project located at the Lawrence Livermore Laboratory, will likely accomplish only one such event per day under ideal conditions! Thus, an improvement on this rate by a factor of approximately twenty-one million would be required to achieve Daedalus fusion pellet ignition rates. While certainly not impossible, this pellet frequency requires a rather vast improvement on current technology. However, it’s important to recognize that the NIF is a physics demonstrator, and that it is not designed to be optimized for rapid ignition rates.

The second feature of Daedalus that appears improbable is the choice of fuel. As mentioned earlier, Helium-3 is a critical component and incredibly rare on Earth. Jupiter would have to be mined by sophisticated orbiting balloons and its Helium-3 ultimately transported to the Daedalus. Again, while certainly not impossible, such planetary mining operations would very likely imply that a massive space-based infrastructure should already be in place. The original Daedalus team acknowledged that a culture with this capability would likely be centuries ahead of our own. Estimates for the total costs of building a Daedalus class spacecraft lie in the ten to one hundred trillion dollar range. With the current NASA budget for 2011 lying close to eighteen billion dollars, increasing it a thousand times is not impossible, given sufficient ambition, but viewed from today’s geopolitical landscape, it is highly unlikely.

A full and systematic treatise regarding the additional and subtle impracticalities of the Daedalus design are beyond the scope of this essay. Suffice to say that most scientists of today would consider the design to be overly ambitious; rather than marvel at its audacity, those same scientists would likely dismiss Daedalus as unrealistic. For this reason, one parallel objective of Project Icarus is to create a credible engineering design that is feasible with minimal extrapolations of current technology. One way of accomplishing this is through incremental improvements of the relevant Technology Readiness Levels (TRL).

The TRL scale is used to gauge the relative maturity of a concept. The scale has nine levels, with TRL 1 being the lowest level of technological maturity, and TRL 9 the highest. For example, the definition of TRL 1 is: “Basic principles observed and reported: Transition from scientific research to applied research. Essential characteristics and behaviors of systems and architectures. Descriptive tools are mathematical formulations or algorithms.”

Contrast this with the other end of the scale, TRL 9, which is defined as: “Actual system ’mission proven’ through successful mission operations (ground or space): Fully integrated with operational hardware/software systems. Actual system has been thoroughly demonstrated and tested in its operational environment. All documentation completed. Successful operational experience. Sustaining engineering support in place.”

The nine levels are a convenient way to assess the maturity of a technology.

Many features of the Daedalus design lie in the TRL 1 to TRL 3 range, indicating a low level of maturity. One measure of success for Project Icarus will be the evolution of critical interstellar technologies to a higher TRL level, since this assists in the promotion of the design credibility. For this reason, TRL evolution and comparison to Daedalus for key research areas is a valuable objective for Project Icarus.

One final, and particularly interesting, parallel motive is to use the project as an experiment in the efficacy of volunteer researchers collaborating in a purely virtual capacity. In many ways, Project Icarus may represent a new way for scientific research to be conducted. The Icarus team currently consists of twenty-nine team members, located across six different countries. The researchers are not paid for their efforts and are primarily motivated by a passion for the field. Interaction between team members is mostly conducted by email. However, a private internet forum also exists where the team can engage in extended discussions on a variety of topics. Internet telephony is also utilized, on occasion, as the need for (virtual) face-to-face communication arises. This mainly electronic team is, in itself, an interesting experiment in the virtualization of scientific collaboration and, should the outcome be successful, Project Icarus could serve as a prototype for future scientific and engineering endeavors.

Nuclear Fusion—A Propulsion Scheme for the Future

One of the Terms of Reference of Project Icarus is that the propulsion system must be ‘mainly fusion-based,’ which is currently considered TRL 2. This mandate to use fusion was based on the fact that Daedalus was itself fusion-powered. As the successor to Daedalus it seemed appropriate for Icarus to utilize this same energy source so as to maintain continuity with the original project. Alternatives to this form of propulsion do exist, and popular non-fusion options include solar sailing and even antimatter. The fusion decision was made early on and met with no objections from any team members.

A more comprehensive discussion of the physics of thermonuclear fusion may be found in Dr. Gregory Matloff’s companion essay in this book. Briefly summarized, fusion is a process whereby two atoms are provided with sufficient kinetic energy to merge and create a larger atom and some by-products. Energy is created in the form of electromagnetic radiation and the vast amounts of kinetic energy contained in the new products that are formed from the reaction.

To give some perspective, fusion processes liberate approximately one million times more energy than even the most powerful chemical reactions. Imagine, for a moment, a hypothetical car of the future, where just one gram of fusion fuel could, in theory, power the vehicle for its entire lifetime. This is, of course, a huge oversimplification, and probably not feasible based on the mechanical architecture that would be necessary to harness the fusion energy, but it emphasizes the point quite nicely. Indeed, fusion processes are what have powered our own star, the Sun, for about five billion years, and will continue to do so for five billion years more.

Fusion has been understood since the early twentieth century, and efforts to harness the energy have been ongoing for most of the latter half of the twentieth century. To date, the only effective utilization of fusion energy has been in rapid and uncontrollable thermonuclear bombs, generally referred to as H-bombs. However, the controlled release of energy in power stations has not yet reached a sustainable break-even which is a situation where more energy is released than is actually put in to create the reaction in the first place. Despite this contemporary lack of success, many believe it is simply a matter of time until the technology is perfected. Indeed, progress in experimental fusion reactors has been consistent for a number of decades.

Inertial Confinement Fusion (ICF) is considered a promising approach to fusion propulsion. In ICF the charged reaction products themselves are turned directly into thrust via magnetic nozzles. This process leads to far fewer thermodynamic losses and enables much of the fusion energy to be channeled to create thrust for the spacecraft. The Daedalus spacecraft was to be powered by ICF.

The Project Icarus group has identified no less than seventeen unique approaches to nuclear fusion, including plasma jet driven magneto-inertial confinement fusion, z-pinch fusion, antimatter catalyzed fusion and electrostatic inertial confinement fusion. At the current phase in the project, no one method has yet shown to be a favorable fusion technique that would prove ideal for an interstellar mission. However, research continues, and in the future a candidate will be selected.

* * *
Further Reading

Alan Bond and Tony R. Martin, “Project Daedalus Reviewed”, JBIS, V39, pp. 385-390, 1986.

A. Bond & A. Martin, Project Daedalus: The Final Report on the BIS Starship Study, JBIS, special Supplement, S1-S192, 1978.

Terry Kammash, “Fusion Energy in Space Propulsion”, Progress in Astronautics and Aeronautics, V167, 1995.

Загрузка...